Contact Lenses – Care
We offer various care products for contact lenses and would like to briefly describe them here.
If you have any questions about handling or which care products are best suited for you and your contact lens, please contact us.
We will recommend the optimal contact lens care product for you.
Please observe the package inserts and the instructions for use.
Contact Lens Care
for hard / dimensionally stable contact lenses
Top 1 and Top 2 contact lens care system
Our recommendation for all dimensionally stable and gas-permeable contact lenses
- Top 1 cleaning solution (small bottle 30 ml)
- Tenside – cleaner for all dimensionally stable contact lenses also suitable for Dreamlens (night lenses)
Attention: This must not get directly on the eye!
Top 2 Storage solution (large bottle 125 ml)
Storage and disinfection solution suitable for all dimensionally stable contact lenses except Dreamlens (night lenses) Here we recommend City A solution.
In the evening after wearing and removing contact lenses
Possibility 1 / Option 1:
Sprinkle contact lens with Top 1 Cleaner (4 drops) and rub carefully between thumb and index finger for approx. 20 seconds.
Possibility 2/ Option 2:
Pour the contact lens into the palm of your hand, dribble on Top 1 Cleaner (4 drops) and carefully rub it in a circle with your finger for approx. 20 seconds. Then rinse off the dissolved contamination with saline solution or Top 2 storage solution. Place the cleaned contact lenses in the container and fill up with fresh Top 2 storage solution. For optimal disinfection, the contact lenses should be kept in the liquid for at least 6 hours. The next morning you can put the contact lenses back in your eye.
Tip: For optimum wearing comfort, we always recommend using contact lenses with a drop of fresh Top 2 storage solution.
- Progent Intensive Cleaner:
Additional intensive cleaning and protein removal for all dimensionally stable contact lenses also suitable for Dreamlens (night lenses). Additional intensive cleaning and protein removal for all dimensionally stable contact lenses also suitable for Dreamlens (night lenses).
Experience has shown that 1 application per month is sufficient. You can also use the intensive cleaning more often if necessary. According to the manufacturer 1 application per week would be possible.
Place the contact lenses in the respective clamps of the enclosed special container.
Fill the contents of ampoule A into the container.
Then fill the contents of ampoule B into the container.
Close the container and shake it briefly.
Leave the contact lenses in the container for about 30 minutes.
Pour the liquid away and clean the contact lenses as for daily care with Top 1 and rinse the contact lenses well.
Now place the contact lenses in the normal container with fresh storage solution.
The next morning you can insert the lenses as usual.
Attention: The liquids of the ampoules must not get on the eye!
City Care A (All in One)
Storage solution and combination solution for all dimensionally stable contact lenses
Especially suitable for Dreamlens (night lenses).
Application Storage and disinfection solution:
Storage and disinfection solution for all dimensionally stable contact lenses.
For optimum disinfection, contact lenses should be kept in the liquid for at least 4 hours (or overnight).
Tip: We recommend the additional surface cleaner Top 1 for optimal cleaning.
Contact Lenses Care for Soft Contact Lenses
City 3 – All in One:
We recommend this combination solution for all monthly lenses.
Combination solution for daily cleaning and disinfection of soft contact lenses.
Clean the lens on the palm of your hand:
Place the lens on the palm of your hand, put on 5-10 drops of City 3 solution and rub carefully for approx. 20 seconds. Then rinse well with the All in One solution and place the contact lens in the container.
Disinfect the container afterwards:
Then fill the container with fresh City 3 solution. For optimal disinfection, allow it to stand for at least 6 hours or overnight.
If contact lenses are not worn for more than 30 days, disinfect again. Please always use fish solution
This solution can reach the eye directly.
Optimum cleaning only with manual cleaning in the palm of the hand (see Cleaning).
Tip : For an even more intensive cleaning with heavy deposits we recommend an additional protein removal with City protein removal tablets.
City E Protein Removal Tablets:
Weekly intensive cleaning suitable for all contact lenses
Fill contact lens case with City 3 (All in One) or City S saline solution.
Place 1 tablet in the contact lens container (basket).
Store in solution for at least 2 hours, at most 24 hours.
After use, rinse contact lenses with All in One or saline solution.
The contact lenses can then be used.
City One Step System:
For very good disinfection and neutralisation for all soft contact lenses.
Particularly suitable for sensitive eyes as it is free of preservatives.
Place the contact lens in the cups and fill the container to at least the mark. Please add 1 neutralisation pill.
Close container and shake briefly.
Duration: at least for 2 hours, better leave to stand overnight.
The liquid turns green-yellow (green = GO).
That’s for you to be sure that the neutralisation is guaranteed.
Then you can use the contacts directly.
Tip :For optimum care and cleaning of the contact lens, we recommend City E protein removal pills once a week.
If the lens are to be stored for longer than 2 days, please disinfect and neutralise them again.
- Easy to use
- No additional surface cleaning required.
- Fast disinfection (only 2 hours)
Our top recommendation for all soft contact lenses
City 1 and City 2
Optimum cleaning and disinfection for all soft contact lenses
City 1 Disinfection solution
City 2 Neutralisation solution
Application 1st stage (City 1)::
1st stage (City 1)
Fill lens container with City 1 at least up to the mark.
Place the contact lens in the cups
Close container and shake Washer briefly
Allow it to work for at least 20 minutes (or overnight).
2nd level (City 2)
Empty the lens container and fill up with City 2, shake Washer well
Store the contact lens in the neutralisation solution for at least 20 minutes.
Afterwards you can insert the contacts
Best cleaning and disinfection of contact lens
No manual cleaning required
Contact lens can be stored longer than 1 week in the City 2 solution
Very compatible care product especially for very sensitive eyes.
1 – stage hydrogen peroxide system for all soft contact lens
- Place the contact lens in the baskets of the contact lens container (disc container).
- Fill the container with the solution up to at least the marking level.
- Shake container briefly
Duration at least 6 hours:
Leave the contact lenses in the disc case for at least 6 hours (or overnight), to ensure complete neutralisation.
You can then insert the contact lens directly.
Tip : For sensitive eyes, rinse the contacts with saline solution before insertion.
City Wetting Solution / Lacrifresh
Post-wetting solution with hyaluronate for all contact lens wearers suitable for increasing the wearing comfort of contacts.
Application City B wetting solution:
City B Post-wetting solution before inserting contact lens (except Dreamlens)
and can be used while wearing contact lens.
1 – 2 drops into the eye or one drop onto the contact lens.
Tip : Also suitable for people who do not wear contact lens. Especially after sauna or sports
City Saline Solution
Saline solution for all contact lens
Application City S Saline for insertion, rinsing, storage and wetting:
City S Saline for insertion, rinsing, storage, wetting and dissolving of City E protein removal pills.